{"id":1659,"date":"2009-07-07T21:15:11","date_gmt":"2009-07-08T03:15:11","guid":{"rendered":"http:\/\/www.greatcakessoapworks.com\/handmade-soap-blog\/?p=1659"},"modified":"2022-10-03T16:25:35","modified_gmt":"2022-10-03T22:25:35","slug":"how-to-make-beer-soap","status":"publish","type":"post","link":"https:\/\/www.greatcakessoapworks.com\/handmade-soap-blog\/index.php\/how-to-make-beer-soap\/","title":{"rendered":"How to Make Beer Soap"},"content":{"rendered":"

What is beer soap? Quite simply, it is soap that is made with beer as the liquid instead of water. However, let me say that if you have not made beer soap before, you should be fully prepared. It is not for the faint of heart because you will have to work quickly. You should have quite a few successful batches of cold-processed soap under your belt before attempting this process. In fact, I am not even providing a recipe, only a method. Ok, that’s my disclaimer. You can’t say I didn’t warn you!<\/p>\n

After that disclaimer, now let me share WHY you might want to make beer soap. For me, it’s a great marketing hook. I often hear at the market – “Wow! Look at that! Beer soap!” Besides that, beer is also supposed to be a great conditioner for your skin.<\/p>\n

Are you ready to get started now? First, you will need to prepare the beer and the oils a full day ahead. Using your regular soap recipe, start by pouring the beer (amount should be 40% of the oils – do NOT discount the liquid) into a plastic pitcher (do NOT use pyrex or glass) and letting it get flat. Really flat. If you have carbon dioxide bubbles, you will have lye bubbles which is really<\/em> not safe. Once the beer is flat, I recommend boiling it to remove the alcohol, then cool it down in the refrigerator overnight.<\/p>\n

The next day you can make soap. Here is my flat, non-alcoholic beer in the plastic pitcher just waiting for the lye to be added:<\/p>\n

\"Cold,<\/a>
Cold, Flat Beer<\/figcaption><\/figure>\n

Now I add my lye EVER SO SLOWLY into the beer. Notice that I am wearing rubber gloves. Always wear your safety gear!!<\/p>\n

It will turn a lighter yellowish color and start to stink pretty bad. That’s why I always make my lye solution under the fan under my microwave WHICH VENTS OUTSIDE. I also learned to cover the back of my stove with a towel. It seems that little bits of lye have eaten away some of the enamel finish. Oops. Back to the lye solution. If you pour the lye too quickly, the beer will heat up and cause a volcano. Ask me how I know! Fortunately, it was contained on my glass stovetop…<\/p>\n

\"Adding<\/a>
Adding lye to the beer, the color is getting lighter<\/figcaption><\/figure>\n

As the beer continues to heat up, it will turn back to a darker brown.<\/p>\n

\"Beer<\/a>
Beer is heating up, turning dark again<\/figcaption><\/figure>\n

Once I have all the lye incorporated, I usually put the pitcher(s) in my sink with cold water and ice to speed up the cooling process. I’ve noticed that with a regular lye and water solution, the stink will eventually go away when all the lye has been fully incorporated. Not so much with the beer. In fact, the plastic pitcher will probably carry the smell even after you run it through the dishwasher too. So don’t think you can use it for lemonade when you’re finished making soap. NOT that you would use your lye pitcher for lemonade anyway!!<\/p>\n

\"Lye<\/a>
Lye solution in the sink, cooling down<\/figcaption><\/figure>\n

When the temperature of the lye solution reaches about 85-90 degrees, you’re ready to make soap. I usually use my stick blender for this soap, but you could also use a hand whisk. I just like the smoothness of soap that’s been blended with the electric blender. Not to mention the adrenaline rush of trying to get the soap made before it becomes a brick in your soap pot…<\/p>\n

\"Adding<\/a>
Adding lye solution to room temp oils<\/figcaption><\/figure>\n

After about two seconds of stick blending, I add a little bit of wheat bran to this batch.<\/p>\n

\"Adding<\/a>
Adding some wheat bran<\/figcaption><\/figure>\n

After stirring the wheat bran with my spoon, I add my essential oil blend. I like to stick blend this too just to be sure it’s all mixed in. Just for a few seconds though. Once it starts to thicken, it will set up fast.<\/p>\n

\"Adding<\/a>
Adding essential oils<\/figcaption><\/figure>\n

Time to pour!<\/p>\n

\"Pouring<\/a>
Pouring beer soap into the mold<\/figcaption><\/figure>\n

You can see that by the time I have it completely poured, it is really getting thick. I have a few seconds to smooth the top with my spoon, put plastic wrap over it, and cover it with a towel.<\/p>\n

\"Smoothing<\/a>
Smoothing the top with my spoon - it's setting up now!<\/figcaption><\/figure>\n

I usually cut this soap the next day. Sometimes I have to wait two. It requires a full 4-6 weeks to cure. And it really does NOT smell like beer when it’s all done. In fact, even by the time I cut it, all I can smell is the essential oil blend. Here’s my finished product:<\/p>\n

\"Patchouli<\/a>
Patchouli Beer Bars<\/figcaption><\/figure>\n

Many thanks to my darling daughter (who will soon be eight) for taking pictures while I made this soap. I couldn’t have done it without her!<\/p>\n","protected":false},"excerpt":{"rendered":"

What is beer soap? Quite simply, it is soap that is made with beer as the liquid instead of water. However, let me say that if you have not made beer soap before, you should be fully prepared. It is […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[205,206,204],"class_list":["post-1659","post","type-post","status-publish","format-standard","hentry","category-making-soap","tag-beer-soap-tutorial","tag-how-to-make-beer-soap","tag-making-beer-soap"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t